DEF-041TA Outdoor Defibrillator Case with thermoregulation and anti-theft alarm.

TECHNICAL FEATURES

Outdoor Defibrillator Case with  Thermoregulation and  Anti-theft alarm. 

Outdoor defibrillator case made of 15/10 thick P02 carbon steel, watertight welds on all sides, water and dust-tight door seals. 1 windowed door (4 mm thick, transparent acrylic sheet).

Internal shelf with removable hot air recirculation grille. Wall-fixing system. 

Snap fastener with adjustable pulls, possibility of inserting padlock or seal, copolymer handle.

Version with thermostat-controlled heater 220 volts with built-in thermostat, maintains internal temperature above 10 degrees, on-off temperature control with minimum temperature 10 degrees maximum temperature 20 degrees. The thermostat-controlled heater requires connection to the civil electricity supply (220 volts).

The case also includes an anti-theft device with a magnetic sensor and built-in 105dB siren that activates when unauthorised withdrawals occurs, powered by a 9V alkaline battery and equipped with a low battery warning.

Internal thermometer with digital display located on the door of the case.

Ideal for places where the temperature drops below 0°.

To be installed in shaded areas

The electrical resistance thermoregulation system contained in the DEF041T and DEF041TA products must be installed by qualified professionals, otherwise the manufacturer will not be liable for any malfunctions. 

SIZES

425x215x480 mm (WxDxH)

Heater

pet adhesive + aluminium

Sizes

380x165mm 230V 70W

Heat protector switch-off temperature 80°c.

Internal room thermostat ‘+10°c ON / +20°c OFF’.

Insulated and with cable l=500mm.

Output cables f+n l=100mm.

Layering: all / pet + carbon / adhesive.

Conforms to European Directive 2014/35/EU and complies with the following standards: EN 60335-1; 2015/863/EU; EN 50106; EMC 2004/108/ EEC.

Alarm

Monitoring device with magnetic sensors that activates the unit by emitting a loud alarm sound when unauthorised withdrawals occur.

Activation via keypad located on the alarm body.

Siren powered by 3 ‘LR44’ type button batteries.

Alarm signal volume 100 dB.

CE approved.

Sizes 85x46x9 mm (WxHxD)